Mares Matrix Manual de Instruções descarregar pdf (Página 7)

7

1.4.1 DIGITAL WATCH DISPLAY

The digital watch display is the “home” display

of Matrix. In this mode, you have a central

ribbon with the current time in hours and

minutes, while the top and bottom portions of

the display can be customized.

To change what is displayed on the top portion,

press the top right button. The choice is

between a blank ﬁeld, the current date, the set

alarm time and the second time (useful when

travelling to a different time zone).

To change what is displayed on the bottom

portion, press the bottom right button. The

choice is between a blank ﬁeld, the temperature

and the battery level. Note that the temperature

reading will be affected by your body heat while

you are wearing the watch.

1.4.2 ANALOG WATCH DISPLAY

From the digital watch display, press the top

left button to switch to a simulated analog

watch display.

1.4.3 DIGITAL COMPASS

From either watch display, press and hold the

top left button to reach the digital compass

display. Matrix has a tilt-compensated digital

compass which can be used at almost any

inclination. The compass can be called up at

any moment during the dive and it can also be

used on the surface. This menu allows you to

use the compass on the surface and also to set

a bearing for reference during your next dive.

Note that for optimum energy management

the compass times out after 8 seconds when

on the surface.

The number shown in the middle of the

compass rose represents the bearing, between

0 (North) and 359.

1.4.3.1 SETTING A BEARING

Setting a bearing is useful for instance if you

are on a boat and there is a landmark on the

shore that you can use for alignment to reach

a speciﬁc spot on that dive site. Press the top

right button and a dot will appear to indicate

the set bearing. Additional symbols will appear

as well: squares at 90 degrees, triangles at

120 degrees and two parallel lines at 180

degrees, as an aid in navigation for square,

triangular and reciprocal courses. The number

at the bottom represents the deviation of the

direction you are pointing at with reference to

the set bearing.

Once underwater, align the dot with the arrow

and start swimming in that direction. If you

press the top right button again, the new

bearing will override the one in memory. If you

press and hold the top right button you erase

the bearing.

1.5 IN CASE OF EMERGENCY ICE

Matrix allows you to enter information about

yourself, such as name, contact information,

emergency number, insurance policies and

allergies. This information is entered via the

PC software Dive Organizer. Alternatively, it

can also be entered via Diver’s Diary (Mac

software). To view the information on Matrix

press the bottom left button from either watch

or from the post-dive display.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comentários a estes Manuais

Sem comentários